Animated furniture assembly instructions, step by step
Free animated 3D assembly instructions for IKEA furniture: MALM, KALLAX, BILLY, PAX, HEMNES and more. Replay, slow down and rotate every manual step.
190 guides, each rebuilt from the official manual: the same parts, counts and order, at the real size, with every step as a short animation.
- IKEA BILLY bookcase assembly instructions — The best-selling bookcase: cam-lock frame, slide-in back panel, 4 adjustable shelves and wall anchoring.
- IKEA LACK side table assembly instructions — The classic square side table. Four legs screw straight into the top: no tools needed.
- IKEA MARIUS stool assembly instructions — Steel-frame stool: two U-shaped leg frames bolted together, then screwed to the seat.
- IKEA KALLAX shelf unit 2x4 assembly instructions — The classic 8-cube shelf unit: a screwed frame around a dowelled grid of shelves and dividers, fixed to the wall.
- IKEA MICKE desk assembly instructions — Compact desk with a cabinet, a wide drawer, a small drawer, a cable outlet and a hidden cable tray at the back.
- IKEA BEKVÄM step stool assembly instructions — Folding beech step stool with two steps and a slatted top step: front legs, hinges, a back leg frame and two locking stays, plus a wall hook to hang it up.
- IKEA LACK coffee table assembly instructions — The classic LACK coffee table with a lower shelf. Legs screw into the top by hand; the shelf rests on 4 small angle brackets.
- IKEA PAX wardrobe frame assembly instructions — The new fold-out PAX frame: it arrives pre-hinged and folded, stands up, unfolds, clicks onto adjustable feet and is anchored to the wall.
- IKEA HEMNES 3-drawer dresser assembly instructions — Solid pine dresser with a frame-and-panel look: two side frames, front rails, a drawer interlock, 3 drawers on runners and wall anchoring.
- IKEA MALM chest of 3 drawers assembly instructions — The classic MALM dresser: a cam-lock frame on a plinth, a nailed-on back panel, wall anchoring and three drawers on runners.
- IKEA MALM bed frame (high, Queen) assembly instructions — The high MALM Queen bed frame in dark-brown veneer: cam-lock frame, bolted two-part headboard, telescopic centre beam and the LURÖY roll-out slatted base.
- IKEA BESTÅ frame assembly instructions — Tall BESTÅ storage frame: cam-lock carcass built lying down, slide-in back panel, adjustable feet and wall fixing, with spacers for a skirting board.
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions — Galvanised steel shelving for indoors or outdoors: four angle-steel uprights screwed to four sheet-steel shelves, then fixed to the wall.
- IKEA LACK wall shelf assembly instructions — The floating wall shelf: a hidden steel fitting is screwed to the wall, the hollow shelf slides over it and two screws lock it.
- IKEA ALEX drawer unit assembly instructions — The 5-drawer ALEX unit in white: a cam-lock carcass with pre-mounted runners, three large and two small drawers, glides, and an optional desktop on top.
- IKEA BRIMNES wardrobe with 3 doors assembly instructions — A white three-door wardrobe with a mirror door: cam-lock frame built lying down, nailed folding back panel, hinged doors, clothes rail, shelves and wall anchoring.
- IKEA TRONES shoe cabinet/storage assembly instructions — A slim moulded-plastic shoe cabinet with a tilt-out door: it comes ready-made, so you take the door off, hang the cabinet on 4 wall screws and click the door back in.
- IKEA NISSAFORS trolley assembly instructions — Black steel trolley on castors: three sheet-steel trays (perforated, plain and deep) put together with click-in plastic clips, screwed between two U-shaped tube frames.
- IKEA VESKEN shelf unit assembly instructions — A narrow four-shelf unit in moulded white plastic for the bathroom: perforated shelves and short legs that simply click into each other, then two small brackets hold it to the wall.
- IKEA EKET cabinet assembly instructions — Small open EKET cube: four mitred panels that hook together without screws, a slide-in back panel and wall fixing with adjustable spacers.
- IKEA BRIMNES bookcase assembly instructions — A tall black bookcase with two drawers: cam-lock frame, nailed-on back panel, 3 adjustable shelves, wall anchoring and two framed drawers on runners.
- IKEA HEMNES bookcase assembly instructions — Solid pine bookcase with framed sides: rails and a fixed shelf on cam locks, a two-part back panel, adjustable feet, 5 loose shelves and wall anchoring.
- IKEA BRIMNES cabinet with doors assembly instructions — A low black BRIMNES cabinet: a cam-lock frame built lying on its front, a nailed-on back, wall fixing, two hinged frame-and-panel doors and two adjustable shelves.
- IKEA LÄTT children's table with 2 chairs assembly instructions — A small pine-and-white table with two matching chairs for children: every piece is a frame of slot-together rails held by 4 bolts, with the white top or seat sliding into grooves.
- IKEA HEMNES day-bed frame with 3 drawers assembly instructions — White day bed with a frame-and-panel back and ends, a pull-out slatted base on castors that turns it into a double bed, and 3 big drawers on runners.
- IKEA TROFAST frame assembly instructions — Low kids’ storage frame with two dividers and 18 box rails for TROFAST slide-in boxes, built upside down with dowels and allen-key screws.
- IKEA VESKEN trolley assembly instructions — A slim three-shelf trolley in white moulded plastic that rolls into narrow gaps: the castors, legs, shelves and caps simply click together, no tools needed.
- IKEA LACK wall shelf unit assembly instructions — A tall, narrow wall unit: 7 box shelves screwed to a back board, then hung on the wall by a steel plate at the top.
- IKEA LENNART drawer unit assembly instructions — The slim LENNART drawer unit in white: a steel tube frame with a mesh top, two castors at the back and three mesh drawers folded from flat and clicked together.
- IKEA FJÄLLBO shelving unit assembly instructions — Black steel frame on six posts with a wooden top and middle shelf, a perforated steel bottom shelf and side panels, and two perforated doors.
- IKEA ALEX desk assembly instructions — White desk with two wide drawers under the desktop, a hinged flap over a hidden cable compartment with two cable outlets, on slim white steel legs.
- IKEA OMAR shelving unit (galvanised) assembly instructions — Galvanised steel wire shelving: three wire shelves slide onto four posts and wedge onto plastic clips, then the unit is clipped to the wall.
- IKEA VITTSJÖ shelving unit assembly instructions — Slim black-brown steel shelving unit with three glass shelves: two ladder-style side frames joined by crossbars, a top and bottom panel, then fixed to the wall.
- IKEA MALM dressing table assembly instructions — A high-gloss MALM dressing table: thick leg panels bolted to the top, a loose glass plate held by clips, wall anchoring and one wide drawer on concealed runners.
- IKEA EKET cabinet with 2 doors and 1 shelf assembly instructions — Dark grey EKET cabinet: four mitred panels that hook together without screws, a folding back panel held by clips, push-to-open doors on pivot pins and one shelf.
- IKEA NORDEN gateleg table assembly instructions — Solid birch drop-leaf table: a slim underframe with 6 small drawers and two swing-out gate legs, so it folds down to a 26 cm deep console.
- IKEA BRUSALI shoe cabinet with 3 compartments assembly instructions — A tall white shoe cabinet with three tilt-out compartments: you build the carcass lying on its side, assemble the three compartments face down, hang them on their pivots, then stand it up and fix it to the wall.
- IKEA BAGGEBO bookcase assembly instructions — A slim white bookcase with 4 open compartments: 5 boards on dowels and screws, a folding back panel nailed on, and wall anchoring.
- IKEA KVISTBRO storage table assembly instructions — A round black wire basket that doubles as a side table: stick four pads under it and lay the lid on top.
- IKEA BRIMNES bedside table assembly instructions — A small white BRIMNES bedside table: a cam-lock frame built lying down, a nailed-on back, an open shelf, and a drawer with a frosted-glass front on runners.
- IKEA TUFFING bunk bed frame assembly instructions — Low dark grey steel-tube bunk bed with a fabric guard round the top bunk, a fabric end panel below, mesh slatted bases and a hook-on ladder.
- IKEA BAGGEBO shelving unit (metal, white) assembly instructions — White powder-coated steel shelving: four perforated shelves and a small perforated back panel screwed between four square legs, then fixed to the wall.
- IKEA HORNAVAN trolley assembly instructions — A narrow white bathroom trolley with three wire-mesh baskets: the baskets press onto the rails of two tube side frames and the castors push into the legs, no tools needed.
- IKEA STIG bar stool with backrest assembly instructions — A white steel-tube counter stool: two leg frames joined by rails, a backrest on two tubes, a footrest, and a moulded seat that clicks on.
- IKEA RÅSKOG trolley assembly instructions — A white steel trolley with three deep baskets: two tube leg frames are screwed onto a U-shaped base, each basket is bolted between them and four castors screw into the corners.
- IKEA FRANKLIN bar stool with backrest, foldable assembly instructions — Foldable steel bar stool with backrest: it comes folded and ready, you only screw the footrest on with 2 screws, then unfold it until it clicks.
- IKEA EKET cabinet with 4 compartments assembly instructions — White open EKET cabinet: four mitred panels and a cross divider that hook together without screws, a folding back panel held by clips, and wall fixing with adjustable spacers.
- IKEA KOLBJÖRN cabinet in/outdoor assembly instructions — A beige powder-coated steel cabinet for indoors or outdoors: two side frames and a bottom panel bolted together lying down, a back and a top that hook on, two doors on pivot pins and a shelf on hooks.
- IKEA ALEX drawer unit on castors assembly instructions — The wide, low 6-drawer ALEX unit on castors in white, made to roll under a desk: a cam-lock carcass with pre-mounted runners, six identical drawers and four castors.
- IKEA MAMMUT children's stool assembly instructions — A chunky moulded-plastic stool for children, for indoors or out: four push-in legs click into the seat, no tools or screws.
- IKEA LISABO table assembly instructions — Dining table with an ash veneer top and solid birch legs that slide onto rails under the top and lock with 4 tool-tightened fittings.
- IKEA STORKLINTA chest of 2 drawers assembly instructions — A small white chest of 2 drawers that clicks together: pins drop into keyhole slots, the back slides into grooves, and the drawers run on wheeled runners.
- IKEA EKET cabinet with 2 drawers assembly instructions — White EKET cabinet with two push-to-open drawers: four mitred panels that hook together without screws, a slide-in back panel held by clips, full-extension runners and wall fixing with adjustable spacers.
- IKEA BRIMNES day-bed frame with 2 drawers assembly instructions — White day bed with framed end panels and a back, a slatted pull-out base on castors that turns it into a double bed, and 2 big drawers on runners in the base.
- IKEA TÄRNÖ table, outdoor assembly instructions — Small folding garden table: hook the black steel frame into the slatted acacia top, lock it with one knob, done. It comes apart again in seconds to store flat.
- IKEA BISSA shoe cabinet with 3 compartments assembly instructions — A slim white shoe cabinet with three tilt-out compartments: you build the frame lying on its side, stand it on its top, lay it face down to drop in the three compartments, then fix it to the wall.
- IKEA BRIMNES dressing table assembly instructions — A white BRIMNES dressing table: a cam-lock frame built lying down, a drawer on runner rails, and a mirror lid on concealed hinges with a lid stay over a divided storage compartment.
- IKEA MYDAL bunk bed frame assembly instructions — Solid pine bunk bed with two slatted bases, guard rails round the top bunk and a fixed ladder at either end.
- IKEA VISTHUS wardrobe assembly instructions — A grey and white wardrobe with three doors, a clothes rail, shelves, four small drawers on runners and two big drawers on castors: carcass built lying down, then stood up and fixed to the wall.
- IKEA VIKHAMMER bedside table assembly instructions — A white VIKHAMMER bedside table: a cam-lock box built upside down, a steel leg frame bolted on, and a drawer on full-extension runners above an open shelf.
- IKEA IVAR cabinet assembly instructions — A solid pine IVAR cabinet: a dowelled and screwed frame built lying on its front, a slide-in back with a wall rail, two doors on clip-on hinges and two adjustable shelves.
- IKEA KALLAX desk assembly instructions — Shallow desk with a built-in 1×2 KALLAX shelf section, one leg panel and a hidden cable tray under the desktop.
- IKEA MAMMUT children's table assembly instructions — A sturdy moulded-plastic children's table for indoors or out: four legs screw into the top by hand, no tools needed.
- IKEA LIXHULT cabinet assembly instructions — A small grey powder-coated steel cabinet with two doors: two base frames, panels that click and hook together, four legs and doors on pivot pins.
- IKEA BISSA shoe cabinet with 2 compartments assembly instructions — A slim white shoe cabinet with two tilt-out compartments: you build the frame lying on its side, stand it on its top, lay it face down to put in the two compartments, then fix it to the wall.
- IKEA TINGBY side table on castors assembly instructions — A square white side table on castors with a lower shelf: four quarter-round legs click into the top, the shelf goes on, and the castors screw through it into the legs.
- IKEA BESTÅ drawer frame assembly instructions — Drawer for a BESTÅ frame: a click-together box with corner profiles, a slide-in bottom, a cam-locked BESTÅ front and couplings for the drawer runners.
- IKEA HAUGA wardrobe with sliding doors assembly instructions — A white two-door sliding wardrobe with a middle divider, a fixed shelf and a clothes rail on each side: the carcass clicks together lying on its front, is stood up and fixed to the wall, then the two doors are hung in their top and bottom tracks.
- IKEA TJUSIG shoe rack assembly instructions — Low black solid-wood shoe rack with two shelves of steel rods, bolted, dowelled and screwed together.
- IKEA VESKEN corner shelf unit assembly instructions — A small three-shelf corner unit in white moulded plastic for the bathroom: triangular perforated shelves, feet, legs and caps simply click together, no tools needed.
- IKEA BRIMNES chest of 4 drawers assembly instructions — A tall white BRIMNES chest: a cam-lock frame with four back boards built lying on its side, fixed to the wall, and four drawers with frosted-glass fronts on runners.
- IKEA BRIMNES TV bench assembly instructions — A black BRIMNES TV bench: a cam-lock frame built lying on its front, a nailed-on back, fixed to the wall, and two framed drawers on runners under two open compartments.
- IKEA ENHET wall frame with shelves assembly instructions — An anthracite powder-coated steel wall frame: two side frames joined by six clip-in tubes, three shelf trays, hung on two wall screws through corner brackets.
- IKEA BESTÅ TV bench assembly instructions — Long, low BESTÅ TV bench with three open compartments: a cam-lock frame built upside down, two back panels with a cable opening in the middle, adjustable feet and wall fixing.
- IKEA STÄLL shoe cabinet with 4 compartments assembly instructions — A very slim white shoe cabinet with four tilt-out compartments: you build the frame face down, add the legs, fix it to the wall, then hook in the four compartments.
- IKEA TROGEN children's step stool assembly instructions — A sturdy two-step stool in bright yellow that helps children reach the sink: two side panels with carry handles, two steps and two front rails, held by dowels and 8 bolts.
- IKEA ALEX drawer unit with 9 drawers assembly instructions — The tall, narrow 9-drawer ALEX unit in white: a cam-lock carcass built lying on its back, five small and four large drawers on pre-mounted runners, and a safety strap to the wall.
- IKEA TOBIAS chair assembly instructions — Cantilever chair: a clear polycarbonate seat shell screwed onto a chrome-plated steel tube base with 4 screws.
- IKEA BURVIK side table assembly instructions — A small round tray table with a carrying handle. Four legs screw on by hand; two of them also hold the handle.
- IKEA SMÅGÖRA shelf unit assembly instructions — A slim white children's shelf unit with three open compartments: a cam-lock frame built lying on its side, a slide-in back panel, glides, and an adjustable wall fixing hidden under the top.
- IKEA FLISAT children's table assembly instructions — A solid pine children's table with two lift-off lids in the top: a crossbar, four screw-in legs and the lids, done in a few minutes.
- IKEA LÄCKÖ shelving unit, outdoor assembly instructions — A grey powder-coated steel garden shelving unit with four mesh shelves: you screw two side frames onto the back frame with the unit lying on its side, add the glides, stand it up, drop in the shelves and fix it to the wall.
- IKEA OLSERÖD side table assembly instructions — A C-shaped sofa table in anthracite steel tube with a birch-effect top and a dark yellow fabric pocket: four tubes screw into one loop, the top clips on, and it can also be set up as a low table.
- IKEA KYRRE stool assembly instructions — A light birch stool with a rounded triangular seat: three bent birch-veneer legs screw to the underside of the seat.
- IKEA VITTSJÖ coffee table assembly instructions — Round light beige steel coffee table with a tempered glass top and a walnut-effect shelf: two slotted leg frames on a top ring, a shelf screwed onto the cross bars, then the glass.
- IKEA PERJOHAN stool with storage assembly instructions — A solid pine stool with a hand-grip slot in the seat and a low trough between the legs for magazines or shoes, held together with dowels and 12 screws.
- IKEA STRANDMON wing chair assembly instructions — Upholstered wing chair: the seat frame bolts onto the backrest, four wooden legs screw in, and two arm-and-wing panels hook onto the backrest and bolt to the seat.
- IKEA MALM chest of 2 drawers assembly instructions — The small MALM bedside chest: a cam-lock frame built on its side, a nailed-on back panel and two drawers on wheeled runners.
- IKEA RÅGRUND shelving unit assembly instructions — A slim bamboo bathroom tower: a deep four-shelf base topped by a shallower three-shelf section, built from four ladder-like side frames and seven shelves held with 30 Allen screws, then strapped to the wall.
- IKEA SKOGSTA dining table assembly instructions — Large solid acacia dining table with a two-piece top on two black leaning leg frames, joined by a long stretcher and a V-shaped brace.
- IKEA NYSJÖN tall cabinet assembly instructions — A tall, narrow white bathroom cabinet: a cam-lock frame built lying on its side, a nailed-on back, two front legs, fixing to the wall, four shelves and one hinged door with a knob.
- IKEA KLEPPSTAD wardrobe with sliding doors assembly instructions — A white two-door sliding wardrobe with a middle divider, a low fixed shelf and a clothes rail on each side: the carcass is screwed together lying on its front, the back is nailed on, it is stood up and fixed to the wall, then the two doors are hung in their tracks.
- IKEA GURSKEN chest of 3 drawers assembly instructions — A light beige GURSKEN chest: a screwed frame built lying on its front, a nailed-on back, wall anchoring and three knob drawers that slide on plastic runners.
- IKEA TEODORES chair assembly instructions — Stackable dining chair: two powder-coated steel side frames joined by three cross rails, with a moulded plastic backrest and seat.
- IKEA TJUSIG bench with shoe storage assembly instructions — White hallway bench with two shoe shelves of steel rods: two ready-made end frames joined by wooden rails, rods and bolts, built standing on end, with the seat screwed on last.
- IKEA JANINGE bar stool assembly instructions — A white height-adjustable bar stool: a gas spring bolted to a round steel base, a moulded polypropylene seat on a steel column with a release lever, a cover and a T-shaped footrest.
- IKEA SNIGLAR changing table assembly instructions — Beech changing table with a white-floored top tray and lower shelf, dowelled and bolted to four legs.
- IKEA BRIMNES chest of 3 drawers assembly instructions — A white BRIMNES chest of 3 drawers: a cam-lock frame with three back boards and a bottom back rail built lying on its side, fixed to the wall, and three drawers with frosted-glass fronts on runners.
- IKEA HEMNES TV bench assembly instructions — Solid pine TV bench with a light brown top: three drawers under three open shelves, built on its end from two leg frames and four long rails.
- IKEA METOD wall cabinet frame assembly instructions — The white METOD kitchen wall cabinet carcass: cam-lock frame built lying on its side, slide-in back panel nailed square, then hung on a suspension rail or straight on the wall. Doors are sold separately.
- IKEA ÖVNING trolley assembly instructions — A white trolley with open compartments, perforated grey-green steel panels and a steel tray with handles: two boxes are built lying down, joined, put on a castor base and topped with the tray.
- IKEA KNOXHULT base cabinet with doors and drawer assembly instructions — A 120 cm white KNOXHULT kitchen base cabinet with its worktop: a dowelled and bolted frame built lying on its front, a nailed-on back, wall fixing, two hinged doors, two shelves and a drawer on runners.
- IKEA EKENABBEN open shelving unit assembly instructions — An open aspen shelving unit with five white shelves: two ladder-like side frames on dowels and screws, shelves bolted between them lying down, then turned over, stood on adjustable feet and fixed to the wall.
- IKEA ODGER chair assembly instructions — Dining chair in anthracite moulded composite: the seat shell hooks onto the one-piece leg base and is locked from below with two click-in levers, no tools needed.
- IKEA SMÅSTAD loft bed frame w desk and storage assembly instructions — White loft bed on a two-part end panel and a storage unit with open shelves, with a ladder at the storage end and room for a desk underneath.
- IKEA FJÄLLBO TV bench assembly instructions — Long black steel TV bench on eight posts with a solid wood top and middle shelf, a perforated steel bottom shelf, perforated end panels and three perforated doors.
- IKEA DALFRED bar stool assembly instructions — A birch bar stool with a spin-up seat: four splayed legs on two hub discs, a steel footrest ring, and a threaded spindle you screw in to set the height.
- IKEA TORNVIKEN kitchen island assembly instructions — Kitchen island with an oak-veneer worktop, two open shelves on one side and knee space for bar stools on the other, built between two pre-assembled end frames.
- IKEA BROR trolley assembly instructions — A sturdy black steel trolley with three pine plywood shelves: four angle legs are bolted to the shelf frames with corner brackets, then four braked castors are fixed with nuts inside the legs.
- IKEA TUFFING loft bed frame assembly instructions — Dark grey steel-tube loft bed with a fabric guard all round, a mesh slatted base and a leaning ladder that hooks onto the front rail.
- IKEA MAMMUT children's chair assembly instructions — A chunky moulded-plastic children's chair for indoors or out: four legs push into the seat and the backrest clicks into place, no screws.
- IKEA LISABO chair assembly instructions — Solid ash dining chair: two leg frames that cross under the seat in a half-lap joint, a bent ash-veneer backrest and seat, all fixed with one Allen key.
- IKEA RAKKESTAD wardrobe with 3 doors assembly instructions — A black-brown three-door wardrobe with a clothes rail and shelves: the frame is screwed together lying on its front, the back panels are nailed on, then it is raised, fixed to the wall and the panelled doors are hung.
- IKEA NYSJÖN cabinet for washing machine assembly instructions — A tall white frame that stands over a washing machine: a cam-lock frame with a back rail built lying on its side, adjustable feet, a nailed-on back, fixing to the wall, two shelves and two hinged doors with knobs.
- IKEA BROGRUND corner wall shelf unit assembly instructions — A stainless steel corner shelf for the bathroom: three shelf rings screwed between two hooked rails, fixed into the corner with two wall screws, then fitted with trays.
- IKEA ÖRFJÄLL children's desk chair assembly instructions — A swivel desk chair for children: a white steel frame round a moulded seat and back with pink pads, on a threaded height-adjustment column and a five-star base with safety castors.
- IKEA SUNDVIK children's chair assembly instructions — A small painted wooden children's chair: two ready-made side frames joined by the backrest and two seat rails, with the seat screwed on from below.
- IKEA VIHALS sideboard assembly instructions — A white VIHALS sideboard: a keyhole-joined frame built lying on its front, two slide-in back panels, wall fixing, four hinged doors, two shelves and two cam-lock drawers on roller runners.
- IKEA AGAM junior chair assembly instructions — A tall junior chair in black-stained solid wood with a footrest: a spindle backrest, four splayed legs and an H-shaped stretcher, all held with 16 screws.
- IKEA VITVAL loft bed frame assembly instructions — White steel loft bed with light grey fabric guards all round, a roll-out slatted base and a leaning ladder at one end of the long side.
- IKEA TISKEN corner shelf unit with suction cup assembly instructions — A small white bathroom corner basket that needs no drilling: two suction-cup holders click onto its back and press onto clean, dry tiles.
- IKEA VITVAL bunk bed frame assembly instructions — White steel bunk bed with light grey fabric guards, two roll-out slatted bases and a straight ladder near one end of the long side.
- IKEA HEMNES sideboard assembly instructions — Solid pine sideboard with a light brown top: three drawers between two cabinets with doors and a shelf, built on its front from two leg frames.
- IKEA SNIGLAR cot assembly instructions — Solid beech cot for a 60x120 cm mattress: two barred end panels with legs, two barred sides and a base that sits at two heights.
- IKEA IDÅSEN cabinet with doors and drawers assembly instructions — A dark green steel office cabinet: two side frames joined on leg frames lying down, a fixed middle shelf and divider, two steel drawers built from hook-together panels, two shelves on clips and two doors on clip-on hinges.
- IKEA SKRUVBY cabinet with doors assembly instructions — White SKRUVBY cabinet: a cam-lock frame on screw-in feet, a folding back panel held by clips, adjustable wall fixing, two shelves and two grooved doors on clip hinges.
- IKEA BYÅS TV bench assembly instructions — A high-gloss white BYÅS TV bench: a cam-lock carcass on a recessed plinth, three compartments with shelves, two push-open drawers on runners, fixed to the wall.
- IKEA IDANÄS wardrobe assembly instructions — A tall white wardrobe on legs with two folding doors, a clothes rod and shelves: the carcass clicks together lying down, the back panels slide in, it stands on a separate leg frame and is fixed to the wall before the bi-fold doors are hung.
- IKEA VILTO shelving unit assembly instructions — Slim solid-birch bathroom shelving unit: two ladder-style side frames and five shelves, screwed and dowelled together, then fixed to the wall.
- IKEA HAUGA cabinet with 2 doors assembly instructions — A white cabinet with two panelled doors and an open top unit: the lower cabinet clicks together lying on its front, stands up, takes the top unit on one tall back panel, is fixed to the wall, then gets its shelves and doors.
- IKEA LOMMARP cabinet with glass doors assembly instructions — A tall dark blue-green cabinet in two parts: a panelled lower cabinet on a shaped plinth and a glass-sided display cabinet with a cornice on top, closed by two glass doors and two panelled doors.
- IKEA IDANÄS cabinet with bi-folding doors assembly instructions — A white cabinet on legs with two folding doors and four shelves: the carcass clicks together lying down, the back panels slide in upside down, it stands on a separate leg frame and is fixed to the wall before the bi-fold doors are hung.
- IKEA TROTTEN cabinet with sliding doors assembly instructions — A white steel office cabinet: two leg frames bolted to the bottom panel, side and back panels that slide down into place, a hooked-on top, four shelves on clips and two lockable sliding doors.
- IKEA TROTTEN drawer unit w 3 drawers on castors assembly instructions — A white steel drawer unit on castors: runners screwed to the side panels, two bottom rails that click in, a slide-in back, a hooked-on top, four castors and three drawers, the middle one with a lock.
- IKEA MICKE drawer unit with drop-file storage assembly instructions — Narrow white MICKE drawer unit on castors: three small drawers on roller runners over a deep drop-file drawer on full-extension ball-bearing runners, with its own castor under the front.
- IKEA IDANÄS bedside table assembly instructions — A white bedside table on a separate leg frame with an open shelf and a drawer: the cam-lock carcass is built lying down, the moulded top hooks on, it is finished upside down and the drawer runs on full-extension runners.
- IKEA BORGEBY coffee table assembly instructions — A round black coffee table with a raised-edge top, four bent legs and a deep, round lower shelf held between the legs.
- IKEA MUSKAN shelving unit assembly instructions — A tall, slim white shelving tower: two ladder-like side frames joined by five slatted shelves with dowels, cam locks and Allen screws, then strapped to the wall.
- IKEA FÖRHÖJA kitchen trolley assembly instructions — Solid birch kitchen trolley with a tabletop, two drawers and two slatted shelves, on two castors.
- IKEA NORDKISA bedside table assembly instructions — A light bamboo bedside table with a slatted bottom shelf, an open shelf and a loose drawer that rests on two rails, built from two ready-made side frames with 16 Allen screws, then topped and finished with a screwed-together drawer.
- IKEA PS cabinet assembly instructions — A white powder-coated steel cabinet that clicks together without screws: two leg frames, a middle frame, side, back and bottom panels, a hooked-on top, two shelves on clips and two locker-style doors on pin hinges.
- IKEA RAKKESTAD wardrobe with 2 doors assembly instructions — A black-brown two-door wardrobe with a clothes rail and a shelf: the frame is screwed together lying on its front, the folding back panel is nailed on, then it is raised, fixed to the wall and the panelled doors are hung.
- IKEA HOLMERUD side table assembly instructions — Oak-effect side table with a low bench on one side and a shelved bay on the other, built upside down and on its back with cam locks, dowels and three screws.
- IKEA BEKVÄM kitchen trolley assembly instructions — Solid beech kitchen trolley: a worktop on an apron frame, four legs, two slatted shelves and two castors.
- IKEA LINDÅSEN wall display shelf assembly instructions — An anthracite steel display shelf with a stepped middle: two side frames screwed to four cross tubes, a pinned stepped unit inside and four lay-in shelves, hung by two keyhole brackets.
- IKEA LACK TV bench assembly instructions — A low black-brown LACK TV bench: a shelf on 4 short legs, two side panels on cam locks under a thick top, fixed to the wall with 2 hidden brackets.
- IKEA SKRUVBY bookcase assembly instructions — White SKRUVBY bookcase: a cam-lock frame built lying on its back, screw-in feet, a folding back panel held by clips, three shelves and an adjustable wall fixing.
- IKEA SKOGSTA chair assembly instructions — Solid acacia dining chair with a hooped spindle back: two leg frames and a cross stretcher bolted under the ready-made seat, with one Allen key and a flat screwdriver.
- IKEA PLATSA frame assembly instructions — A tall PLATSA wardrobe frame: click-together panels with no tools, a slide-in back, adjustable wall spacers and wall fixing.
- IKEA LOMMARP cabinet assembly instructions — A dark blue-green cabinet on a shaped plinth, with two panelled doors over a divider and four shelves, and a wide drawer underneath.
- IKEA SMUSSLA bedside table/shelf unit assembly instructions — White children’s bedside table and shelf unit: a dowelled box with a slide-in divider and shelf held by wire supports, four legs and soft caps.
- IKEA GULLIVER changing table assembly instructions — White changing table with slatted ends, a rimmed changing top and two open shelves, dowelled and screwed together.
- IKEA RESÖ children's picnic table assembly instructions — Solid wood picnic table for children with two fixed benches: two A-shaped end frames bolt to the slatted top, then the benches screw onto the frames.
- IKEA PERJOHAN bench with storage assembly instructions — A solid pine bench with a hand-grip slot in the seat and a long trough between the legs for shoes or baskets, held together with dowels and 16 screws.
- IKEA STORKLINTA chest of 6 drawers assembly instructions — A wide white chest of 6 drawers that clicks together: pins drop into keyhole slots, folding backs slide into grooves, and an interlock lets only one drawer open at a time.
- IKEA KNARREVIK bedside table assembly instructions — Small black steel bedside table: four angle-iron legs screwed to a top tray and a shelf tray with one Allen key.
- IKEA TROTTEN cabinet with doors assembly instructions — A steel office cabinet: two leg frames, side and back panels that slide into place, an open top section bolted together upside down, a middle panel, bottom, shelf and two lockable hinged doors on pins.
- IKEA SUNDVIK cot assembly instructions — White cot for a 70x140 cm mattress: two end panels with legs, two barred sides and a base at two heights; one side swaps for a low rail to make a junior bed.
- IKEA IVÖSJÖN cabinet with doors assembly instructions — Green plastic IVÖSJÖN bathroom cabinet: three stacked cubes that click together without tools, each closed by a top-hinged flap door, fixed to the wall with two brackets.
- IKEA HOL storage table assembly instructions — An acacia lattice chest that doubles as a coffee table: four lattice panels and a plain bottom screwed together, with a loose lid on top.
- IKEA HAUGA bedside table assembly instructions — A white bedside table with one drawer under the top and an open space below: the carcass clicks together lying on its front, stands up, then the drawer is built on its front and slid in on its runners.
- IKEA HOL side table assembly instructions — A square acacia lattice cube that works as a side table with storage inside: four lattice panels and a plain bottom screwed together, with a loose lid on top.
- IKEA MÖRBYLÅNGA dining table assembly instructions — Solid-looking oak veneer dining table with a two-piece top joined by two long rails and two closed leg frames.
- IKEA RÅGRUND wash-basin/corner shelf assembly instructions — A small bamboo corner shelf: three triangular shelves between a ladder frame and a single post, held with 9 Allen screws.
- IKEA VADHOLMA kitchen island assembly instructions — Black solid-wood kitchen island with an oak worktop, two slatted shelves on the open side and room for stools behind the centre partition.
- IKEA NORDVIKEN chair assembly instructions — Solid wood dining chair in black with a three-slat ladder back: two side frames doweled to the rails and slats, screwed together and topped with a solid seat.
- IKEA BILLY bookcase with foldable table assembly instructions — A low BILLY bookcase with a shelf cart on castors inside: pull it out and a hinged tabletop unfolds from the bookcase into a 112 cm deep table.
- IKEA MARIEDAMM table assembly instructions — Round dining table with a black marble-effect top on 4 crossing bent steel legs, locked together in the middle by a square connector.
- IKEA NYSJÖN laundry cabinet assembly instructions — A tall white laundry cabinet: a cam-lock frame with two fixed shelves built lying on its side, a nailed-on back, two front legs, fixing to the wall, a door with two laundry holes, and two laundry bags inside.
- IKEA LUBBAN trolley table with storage assembly instructions — A round rattan side table on castors: a deep basket and a shallow tray ring held between two anthracite tube frames, topped with glass. Built lying on its side with screws, cap nuts and the two included tools.
- IKEA SANDSBERG chair assembly instructions — Stackable black dining chair: two steel tube side frames bolted to two curved cross rails, with a perforated plastic backrest and a seat that clicks on.
- IKEA STACKHOLMEN stool, outdoor assembly instructions — An outdoor stool in light brown stained acacia with a curved seat woven from cord: two leg frames on dowels and screws, bolted into the seat.
- IKEA BROR work bench assembly instructions — A sturdy black steel work bench with three pine plywood shelves: four angle legs with plastic feet are bolted to the shelf frames with corner brackets.
- IKEA GULLABERG bedside table assembly instructions — A white GULLABERG bedside table on four tapered legs, with a drawer on roller runners and an open shelf below, built from two ready-made side frames joined by rails and cam locks.
- IKEA MUSKAN bench assembly instructions — A small white slatted bench with a shelf underneath: two slatted shelves dowelled and screwed between two ready-made side frames.
- IKEA GLENN bar stool assembly instructions — A counter-height bar stool with a white moulded seat shell on two chromed sled-base side frames, bolted together under the seat, with a footrest across the front.
- IKEA UTTER children's table assembly instructions — A light moulded-plastic table for children, for indoors or out: four legs screw into the corners of the top by hand, no tools or screws.
- IKEA INGOLF junior chair assembly instructions — A tall junior chair in antique-stained solid wood with a footrest: two glued side frames joined by four rails, a seat, a crossed backrest brace and a curved backrest.
- IKEA MALMBÄCK display shelf assembly instructions — A slim white steel picture ledge: level it on the wall and fix it with two screws through its back plate.
- IKEA KRITTER children's chair assembly instructions — A small white wooden children's chair with animal cut-outs in the backrest: the backrest and seat go between two ready-made side frames, held by 6 screws.
- IKEA RÅGRUND towel rack/chair assembly instructions — A bamboo chair with a tall ladder back for towels: two side frames, a seat, a lower shelf and a 3-rung ladder, held with Allen screws and angle brackets.
- IKEA MUSKAN storage stool assembly instructions — A white slatted stool with storage inside: two leg frames and two slatted panels dowelled and screwed into a box, a bottom shelf dropped in and a slatted lid on top.
- IKEA VIHALS chair assembly instructions — Dining chair with a white steel tube frame and a padded beige-grey seat and backrest that click on, held together by four bolts.
- IKEA TORNVIKEN wall shelf assembly instructions — Off-white wall shelf with shaped brackets and a hanging rail with 6 S-hooks: the frame is built standing on end, then turned upside down onto the shelf top and screwed to the wall.
- IKEA VILTO step stool assembly instructions — Low solid birch step stool: a rounded seat on two splayed leg frames joined by two long rods, put together upside down with 8 screws.
- IKEA KRYLBO chair assembly instructions — Upholstered dining chair in Axvall blue: two steel leg frames and a curved backrest screwed to the padded seat with 10 screws and the Allen key in the box.
- IKEA ROSENTORP chair assembly instructions — White solid wood dining chair with a crossed backrest: the side rails bolt to the back and front frames with barrel nuts, and the seat screws on with four brackets.
- IKEA FLISAT doll's house/wall shelf assembly instructions — A solid pine doll's house that doubles as a wall shelf: two floors, two partitions, a pitched roof with a chimney, hung on the wall with two screws.
- IKEA UTTER children's stool assembly instructions — A light moulded-plastic stool for children, for indoors or out: four legs screw into the corners of the seat by hand, no tools or screws.
- IKEA IDANÄS side table assembly instructions — White side table with tapered legs, a middle shelf and a bottom shelf, built on its side from two ready-made side frames with cam locks, then finished upright.